access-points-

Wireless Access Point Cisco (AIR-AP1852E-S-K9C)

802.11ac Wave 2; 4x4:4SS; Ext Ant; S Reg Dom (Config) ต้องซื้อ Injector AIR-PWRINJ6= และต้องซื้อเสาด้วย 

รายละเอียดเพิ่มเติม

ราคาพิเศษ : กรุณาติดต่อฝ่ายขาย
( Excluded Vat. )

ไม่มีคะแนนสะสมสำหรับสินค้านี้

สั่งซื้อสินค้า กรุณาติดต่อฝ่ายขาย

Wireless LAN Controller Cisco (AIR-AP1832I-S-K9) ทำให้ใหญ่สุด

FeatureSpecifications   
SoftwareCisco Unified Wireless Network Software Release with AireOS wireless controllers:   
●  8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points
   
Supported wireless LAN controllers
●  Cisco 2500 Series Wireless Controllers, Cisco 3500 series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 9800 series Wireless Controllers, Cisco 5760 Series Wireless Controllers**, Cisco Catalyst 3650/3850 Series switch with integrated controller**
   
●  Cisco Mobility Express
   
802.11n version 2.0 (and related) capabilities
●  4x4 MIMO with four spatial streams
   
●  Maximal Ratio Combining (MRC)
   
●  20- and 40-MHz channels
   
●  PHY data rates up to 600 Mbps (40 MHz with 5 GHz)
   
●  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
   
●  802.11 Dynamic Frequency Selection (DFS)
   
●  Cyclic Shift Diversity (CSD) support
   
802.11ac Wave 1 and 2 capabilities
●  4x4 MIMO with four spatial streams, single-user MIMO
   
●  4x4 MIMO with three spatial streams, multiuser MIMO
   
●  MRC
   
●  802.11ac beamforming (transmit beamforming)
   
●  20-, 40-, and 80-MHz channels
   
●  PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz)
   
●  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
   
●  802.11 DFS
   
●  CSD support
   
●  Rogue device detection
   
Maximum number of nonoverlapping channels2.4 GHz5 GHz
●  802.11b/g:
●  802.11a:
◦   20 MHz: 3
◦   20 MHz: 25
●  802.11n:
●  802.11n:
◦   20 MHz: 3
◦   20 MHz: 25
 
◦   40 MHz: 12
 
●  802.11ac:
 
◦   20 MHz: 21
 
◦   40 MHz: 12
 
◦   80 MHz: 6
Integrated antenna
●  2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360°
●  5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°
External antenna (sold separately)
●  Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
Interfaces
●  1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
●  1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (used for Link Aggregation)
●  Management console port (RJ-45)
●  USB 2.0 (enabled via future software)
Indicators
●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions
●  Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
(W x L x H)
Weight
●  3.12 lb (1.41 kg)
1. ทางบริษัทฯ ขอสงวนสิทธิ์ในการรับผิดชอบใดๆ อันเนื่องจากข้อผิดพลาดทางการพิมพ์ (ผิด/ตก)
2. ทางบริษัทฯ ขอสงวนสิทธิ์ในการเปลี่ยนแปลงราคาและโปรโมชั่นโดยไม่แจ้งให้ทราบล่วงหน้า

30 ผลิตภัณฑ์อื่น ๆ ในประเภทเดียวกัน :

ก่อนหน้า ต่อไป

Wireless Access Point Cisco (AIR-AP1852E-S-K9C) Last Updated : 25 March 2019